Shenzhen Koten Technology Co., Ltd. Integrity, Unity, Dedication, and Sharing !
|
Product Details: |
Vehicle Loop Detector |
|
Product nameVehicle Loop Detector | |
ItemPD132 | |
Details | |
1. Application
Loop detectors are used wherever vehicles have to be detected. Like monitoring and safe guarding access ways to counting vehicles. The output signal can be used for controlling door and gate drive mechanisms, operating barriers, controlling traffic light systems in car parks or activating card dispensers in car parks.
2. Technical Data
lOperating voltage: 220V AC ±10%
lPower Consumption5VA
lOutput relays240V/5A AC
lFrequency range20 kHz to 170 kHz
lReaction time10ms
lSignal holding time: Unlimited / limited when loop is permanently covered 10 minutes
lSensitivityadjustable in 8 increments
lWiring50H and 300H. Ideal is 150H
lLoop connection wiring: Maximum length 200 meters,
ltwisted at least 20 times per meter
lAutocorrecting time1to 2seconds
lOperating temperature: -20°C to +65°C
lStorage temperature: -40°C to +85°C
lDimensions (include pedestal ): 78x40x108 mm (L x W x H)
lNet Weight (include pedestal): 265g
lSpecific set the table below. In trial runs, first sensitivity in the lower stalls, the actual test vehicle detection if no response should be an increased sensitivity to stall, so repeated several times until the car seized stability for normal work.
|
|
[NextVD108] |